Show Cimserver - Cisco MDS 9124 - Fabric Switch Reference

show cimserver

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show cimserver
To display the Common Information Models (CIM) configurations and settings, use the show cimserver
command.
Syntax Description certificateName
HttpsStatus
HttpStatus
status
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.3(1)
Usage Guidelines None.
Examples The following example displays CIM server certificate files.
switch# show cimserver certificateName
cimserver certificate file name is servcert.pem
The following example displays the CIM server configuration.
switch# show cimserver
cimserver is enabled
cimserver Http is not enabled
cimserver Https is enabled
cimserver certificate file name is servcert.pem
The following example displays the CIM server HTTPS status.
switch# show cimserver httpsstatus
cimserver Https is enabled
The following example displays the CIM server HTTP status.
switch# show cimserver httpstatus
cimserver Http is not enabled
Cisco MDS 9000 Family Command Reference
22-26
show cimserver [certificateName | HttpsStatus | HttpStatus | status]
Displays the installed Secure Socket Layer (SSL) certificate.
Displays the HTTP (non-secure) protocol settings for the CIM server.
Displays the HTTPS (secure) protocol for the CIM server.
Displays the CIM server status.
Modification
This command was introduced.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x