Pwwn (Fcdomain Database Configuration Submode) - Cisco MDS 9124 - Fabric Switch Reference

Chapter 18 P Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

pwwn (fcdomain database configuration submode)

To map a pWWN to a persistent FC ID for IVR, use the pwwn command in IVR fcdomain database
configuration submode. To remove the mapping for the pWWN, use the no form of the command.
Syntax Description
pwwn-id
fc-id
Defaults None.
Command Modes
fcdomain database configuration submode.
Command History Release
2.1(2)
Usage Guidelines Only one FC ID can be mapped to a pWWN.
Examples The following example shows how to map the pWWN to the persistent FC ID.
switch# config t
switch(config)# ivr fcdomain database autonomous-fabric-num 10 vsan 20
switch(config-fcdomain)# native-autonomous-fabric-num 20 native-vsan 30 domain 15
switch(config-fcdomain-fcid)# pwwn 11:22:33:44:55:66:77:88 0x123456
The following example shows how to remove the mapping between the pWWN and the FC ID.
switch# config t
switch(config)# ivr fcdomain database autonomous-fabric-num 10 vsan 20
switch(config-fcdomain)# native-autonomous-fabric-num 20 native-vsan 30 domain 15
switch(config-fcdomain-fcid)# no pwwn 11:22:33:44:55:66:77:88
Related Commands Command
ivr fcdomain database
autonomous-fabric-num
native-autonomous-fabric-num
show ivr fcdomain database
OL-16217-01, Cisco MDS SAN-OS Release 3.x
pwwn pwwn-id fc-id
no pwwn pwwn-id
Specifies the pWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh, where h
is a hexadecimal number.
Specifies the FC ID of the device.
Modification
This command was introduced.
pwwn (fcdomain database configuration submode)
Description
Creates IVR persistent FC IDs.
Creates an IVR persistent FC ID database entry.
Displays IVR fcdomain database entry information.
Cisco MDS 9000 Family Command Reference
18-41