Show Vsan - Cisco MDS 9124 - Fabric Switch Reference

show vsan

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show vsan
To display information about configured VSAN, use the show vsan command.
Note On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description
vsan vsan-id
membership
interface
fc slot/port
bay | ext port
fcip fcip-id
fv slot/dpp-number/fv-p
ort
iscsi slot/port
port-channel
portchannel-number.
subinterface-number
usage
Defaults None.
Command Modes EXEC mode.
Command History Release
1.2(2)
3.1(2)
Cisco MDS 9000 Family Command Reference
22-384
show vsan [vsan-id [membership] | membership interface {fc slot/port | fcip fcip-id |
fv slot/dpp-number/fv-port | iscsi slot/port |
portchannel portchannel-number.subinterface-number}] | usage]
Displays information for the specified VSAN ID. The range is 1 to 4093.
Displays membership information.
Specifies the interface type.
(Optional) Specifies a Fibre Channel interface on a Cisco MDS 9000
Family Switch.
(Optional) Specifies a Fibre Channel interface on a Cisco MDS 9124 Fabric
Switch, a Cisco Fabric Switch for HP c-Class BladeSystem, and a Cisco
Fabric Switch for IBM BladeCenter.
Specifies a FC IP interface ID. The range is 1 to 255.
Specifies a virtual F port (FV port) interface in the specified slot along with
the data path processor (DPP) number and the FV port number.
Specifies the iSCSI interface in the specified slot/port on a Cisco MDS 9000
Family switch.
Specifies a PortChannel interface specified by the PortChannel number
followed by a dot (.) indicator and the subinterface number.
Displays VSAN usage in the system.
Modification
This command was modified.
Added the bay | ext interface.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x