Show System - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Examples The following example displays the system redundancy status.
switch# show system redundancy status
Redundancy mode
---------------
This supervisor (sup-2)
-----------------------
Other supervisor (sup-1)
------------------------
The following example displays port states after the system default switchport mode f command is
executed.
switch# show system default switchport
System default port state is down
System default trunk mode is on
System default port mode is F
The following example displays error information for a specified ID.
switch# show system error-id 0x401D0019
Error Facility: module
Error Description: Failed to stop Linecard Async Notification.
The following example displays the system health information.
switch# show system health
Current health information for module 2.
Test
-----------------------------------------------------------------
Bootflash
EOBC
Loopback
CF checksum
CF re-flash
-----------------------------------------------------------------
Current health information for module 3.
Test
-----------------------------------------------------------------
Bootflash
EOBC
Loopback
-----------------------------------------------------------------
Current health information for module 5.
Test
-----------------------------------------------------------------
InBand
Bootflash
EOBC
Management Port
CF checksum
OL-16217-01, Cisco MDS SAN-OS Release 3.x
administrative: HA
operational: None
Redundancy state: Active
Supervisor state: Active
Internal state: Active with no standby
Redundancy state: Not present
Frequency
10 Sec
5 Sec
5 Sec
7 Sec
30 Sec
Frequency
10 Sec
5 Sec
5 Sec
Frequency
5 Sec
10 Sec
5 Sec
5 Sec
7 Sec
Status Action
Enabled Enabled
Enabled Enabled
Enabled Enabled
Enabled Enabled
Enabled Enabled
Status Action
Enabled Enabled
Enabled Enabled
Enabled Enabled
Status Action
Enabled Enabled
Enabled Enabled
Enabled Enabled
Enabled Enabled
Halted Enabled
Cisco MDS 9000 Family Command Reference

show system

22-347