Rule - Cisco MDS 9124 - Fabric Switch Reference

rule

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
rule
To specify the tape volume group regular expression, use the rule command. To disable this feature, use
the no form of the command.
Syntax Description
range range
regexp regular expression
Defaults
None.
Command Modes Cisco SME crypto tape volume group configuration submode.
Command History Release
3.2(2)
Usage Guidelines
None.
Examples
The following example specifies the volume group regular expression:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp tbg1
switch(config-sme-cl-tape-bkgrp)# tape-volgrp tv1
switch(config-sme-cl-tape-bkgrp-volgrp)#rule regexp r1
Related Commands Command
show sme cluster
tape-bkgrp groupname
tape-volgrp volume groupname
Cisco MDS 9000 Family Command Reference
20-44
rule {range range | regexp regular expression}
no rule {range range | regexp regular expression}
Modification
This command was introduced.
Specifies the crypto tape volume barcode range. The maximum length
is 32 characters.
Specifies the volume group regular expression. The maximum length
is 32 characters.
Description
Displays information about Cisco SME cluster.
Configures crypto backup group.
Configures crypto backup volume group.
Chapter 20
OL-16217-01, Cisco MDS SAN-OS Release 3.x
R Commands