Tacacs+ Enable - Cisco MDS 9124 - Fabric Switch Reference

Chapter 23 T Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

tacacs+ enable

To enable TACACS+ in a switch, use the tacacs+ enable command in configuration mode. The disable
this feature, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
None.
Command Modes Configuration mode.
Command History Release
1.3(1)
Usage Guidelines
Further TACACS+ commands are only available when the TACACS+ feature is enabled.
Using SHA-1 as the hash algorithm may prevent RADIUS or TACACS+ usage.
Examples
switch# config terminal
switch(config)# tacacs+ enable
Related Commands Command
show
OL-16217-01, Cisco MDS SAN-OS Release 3.x
tacacs+ enable
no tacacs+ enable
Modification
This command was introduced.
Description
Displays TACACS+ server information.
Cisco MDS 9000 Family Command Reference
tacacs+ enable
23-5