Show Flogi - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show flogi

To list all the FLOGI sessions through all interfaces across all VSANs, use the show flogi command.
On a Cisco Fabric Switch for HP c-Class BladeSystem and on a Cisco Fabric Switch for IBM
Note
BladeCenter, the syntax differs as follows:
interface {bay port | ext port}
Syntax Description auto-area-list
database
fcid fcid-id
interface
fa slot/port
fc slot/port
bay port | ext port
fv module-number
vsan vsan-id
Defaults
None.
Command Modes EXEC mode.
Command History Release
1.0(2)
3.1(2)
Usage Guidelines
Output of this command is first sorted by interface and then by VSANs.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show flogi {auto-area-list} | database {fcid fcid-id | interface {fa slot/port | fc slot/port | fv
module-number} | vsan vsan-id}
Displays the list of OUIs that are allocated areas.
Displays information about FLOGI sessions.
Displays FLOGI database entries based on the FCID allocated. The format
is 0xhhhhhh.
Displays FLOGI database entries based on the logged in interface.
Specifies the FA port interface to configure by slot and port number on all
switches.
(Optional) Specifies the Fibre Channel interface to configure by slot and
port number on an MDS 9000 Family switch.
(Optional) Specifies the Fibre Channel interface by bay or by external port
on a Cisco Fabric Switch for HP c-Class BladeSystem or on a Cisco Fabric
Switch for IBM BladeCenter. The range is 0 to 48.
Specifies the Fibre Channel Virtualization interface by module on all
switches.
Displays FLOGI database entries based on the VSAN ID. The range is
1 to 4093.
Modification
This command was introduced.
Added the interface bay | ext option.
Cisco MDS 9000 Family Command Reference
show flogi
22-123