Nwwn (San Extension Configuration Mode) - Cisco MDS 9124 - Fabric Switch Reference

nwwn (SAN extension configuration mode)

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
nwwn (SAN extension configuration mode)
To configure the nWWN for the SAN extension tuner, use the nwwn command in SAN extension
configuration submode.
Syntax Description nwwn-id
Defaults None.
Command Modes SAN extension configuration mode.
Command History Release
2.0(x)
Usage Guidelines
None.
Examples The following example shows how to add an entry to the SAN extension tuner database.
switch# san-ext-tuner
switch(san-ext)# nwwn 20:42:00:0b:46:79:f1:80
Related Commands Command
san-ext-tuner
show san-ext-tuner
Cisco MDS 9000 Family Command Reference
16-18
nwwn nwwn-id
Specifies the nWWN address. The format is hh:hh:hh:hh:hh:hh:hh:hh,
where h is a hexadecimal number.
Modification
This command was introduced.
Description
Enters SAN extension configuration mode.
Shows SAN extension tuner information.
Chapter 16 N Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x