Show Islb Merge Status - Cisco MDS 9124 - Fabric Switch Reference

show islb pending
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show islb pending
To display iSCSI server load balancing (iSLB) pending configurations, use the show islb pending
command.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
EXEC mode.
Command History Release
3.0(1)
Usage Guidelines None.
Examples The following example shows iSLB pending configuration information.
switch# show islb pending
iscsi initiator idle-timeout 10
islb initiator ip-address 10.1.1.1
static pWWN 23:01:00:0c:85:90:3e:82
static pWWN 23:06:00:0c:85:90:3e:82
username test1
islb initiator ip-address 10.1.1.2
static nWWN 23:02:00:0c:85:90:3e:82
Related Commands Command
show islb initiator
show islb cfs-session status Displays iSLB session information.

show islb merge status

show islb pending-diff
show islb session
show islb status
show islb virtual-target
show islb vrrp
Cisco MDS 9000 Family Command Reference
22-198
show islb pending
Modification
This command was introduced.
Description
Displays iSLB initiator information.
Displays iSLB merge status information.
Displays iSLB pending configuration differences.
Displays iSLB session information.
Displays iSLB CFS status information.
Displays iSLB virtual target information.
Display iSLB VRRP load balancing information.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x