Qos Priority - Cisco MDS 9124 - Fabric Switch Reference

Chapter 19 Q Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

qos priority

To configure the quality of server (QoS) priority attribute in a zone attribute group, use the qos priority
command in zone attribute configuration submode. To revert to the default, use the no form of the
command.
Syntax Description high
low
medium
Defaults Low.
Command Modes Zone attribute configuration submode.
Command History Release
2.0(x)
Usage Guidelines None.
Examples The following example shows how to set the QoS priority attribute for a zone attribute group.
switch# config terminal
switch(config)# zone-attribute-group name admin-attributes vsan 10
switch(config-attribute-group)# qos priority medium
Related Commands Command
show zone-attribute-group
zone-attribute-group name
OL-16217-01 Cisco MDS SAN-OS Release 3.x
qos priority {high | low | medium}
no qos priority {high | low | medium}
Specifies high priority.
Specifies low priority.
Specifies medium priority.
Modification
This command was introduced.
Description
Displays zone attribute group information.
Configures zone attribute groups.
Cisco MDS 9000 Family Command Reference
qos priority
19-7