Streetaddress - Cisco MDS 9124 - Fabric Switch Reference

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

streetaddress

To configure the street address with the Call Home function, use the streetaddress command in Call
Home configuration submode. To disable this feature, use the no form of the command.
Syntax Description
street-address
Defaults
None.
Command Modes Call Home configuration submode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example shows how to configure the street address in the Call Home configuration.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# callhome
switch(config-callhome)# streetaddress 1234 Picaboo Street, AnyCity, AnyState, 12345
Related Commands Command
callhome
callhome test
show callhome
OL-16217-01, Cisco MDS SAN-OS Release 3.x
streetaddress {street-address}
no streetaddress {street-address}
Specifies the customer's street address where the equipment is located.
Allows up to 256 alphanumeric characters in free format for the street
number, city, state, and zip (combined).
Modification
This command was introduced.
Description
Configures the Call Home function.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
Cisco MDS 9000 Family Command Reference
streetaddress
21-65