Zone Copy - Cisco MDS 9124 - Fabric Switch Reference

zone copy

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
zone copy
To copy the active zone set to the full zone set, use the zone copy command in EXEC mode. Use the no
form of the command to negate the command or revert to the factory defaults.
Syntax Description active-zoneset
vsan vsan-id
full-zoneset
bootflash:
ftp:
scp:
sftp:
slot0:
tftp:
volatile:
Defaults None.
Command Modes EXEC mode.
Command History Release
1.3(1)
Usage Guidelines
None.
Examples The following example copies the active zone set to the full zone set.
switch# zone copy active-zoneset full-zoneset vsan 1
The following example copies the active zone set in VSAN 3 to a remote location using SCP.
switch# zone copy vsan 3 active-zoneset scp://guest@myserver/tmp/active_zoneset.txt
Related Commands
Cisco MDS 9000 Family Command Reference
27-6
zone copy active -zoneset full-zoneset vsan vsan-id
zone copy vsan vsan-id active-zoneset {bootflash: ftp: | full-zoneset | scp: | sftp: | tftp: |
volatile:}
Copies from the active zone set.
Configures to copy active zone set on a VSAN to full zone set.The ID of the
VSAN is from 1 to 4093.
Copies the active-zone set to the full-zone set.
Copies the active-zone set to a location in the bootflash: directory.
Copies the active-zone set to a remote location using the FTP protocol.
Copies the active-zone set to a remote location using the SCP protocol.
Copies the active-zone set to a remote location using the SFTP protocol.
Copies the active-zone set to a location in the slot0: directory.
Copies the active-zone set to a remote location using the TFTP protocol.
Copies the active-zone set to a location in the volatile: directory.
Modification
This command was modified.
Chapter 27
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Z Commands