Match - Cisco MDS 9124 - Fabric Switch Reference

Chapter 15 M Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
switch(config)# qos class-map MyClass1 match-any
switch(config-cmap)# match any
The following example specifies a destination address match for frames with the specified destination
FCID.
switch(config-cmap)# match destination-address 0x12ee00
The following example specifies a source address and mask match for frames with the specified source
FCID. Mask refers to a single or entire area of FCIDs.
switch(config-cmap)# match source-address 0x6d1090 mask 0
The following example specifies a destination WWN to match frames.
switch(config-cmap)# match destination-wwn 20:01:00:05:30:00:28:df
Operation in progress. Please check class-map parameters
The following example specifies a source WWN to match frames.
switch(config-cmap)# match source-wwn 23:15:00:05:30:00:2a:1f
Operation in progress. Please check class-map parameters
The following example specifies a source interface to match frames.
switch(config-cmap)# match input-interface fc 2/1
Operation in progress. Please check class-map parameters
The following example removes a match based on the specified source interface.
switch(config-cmap)# no match input-interface fc 3/5
Related Commands Command
qos enable
show qos
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Description
Enables QoS.
Displays QoS information.
Cisco MDS 9000 Family Command Reference

match

15-3