Show System - Cisco MDS 9124 - Fabric Switch Reference

show system

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show system
To display the system information, use the show system command.
Syntax Description
cores
default
switchport
zone
directory information
error-id
hex-id
list
exception-info
pss shrink status
details
redundancy status
reset-reason
module slot
resources
standby manual-boot
uptime
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.0(2)
3.0(1)
3.0(1)
Usage Guidelines Use the show system redundancy status command to ensure that the system is ready to accept a
switchover.
Cisco MDS 9000 Family Command Reference
22-346
show system {cores | default {switchport | zone} | directory information | error-id {hex-id | list}
| exception-info | pss shrink status [details] | redundancy status | reset-reason [module slot]
| resources | standby manual-boot | uptime}
Displays core transfer option.
Displays system default values.
Displays default values for switchport attributes.
Displays default values for a zone.
Directory information of System Manager.
Displays description about errors.
Specifies the error ID in hexadecimal format. The range is 0x0 to 0xffffffff.
Specifies all error IDs.
Displays last exception log information.
Displays the last PSS shrink status.
Displays detailed information on the last PSS shrink status.
Redundancy status.
Displays the last four reset reason codes.
Specifies the module number to display the reset-reason codes.
Show the CPU and memory statistics.
Displays the standby manual boot option.
Displays how long the system has been up and running.
Modification
This command was introduced.
Added the zone option.
Added the standby manual-boot keyword.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x