Show Telnet Server - Cisco MDS 9124 - Fabric Switch Reference

show telnet server

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show telnet server
To display the state of the Telnet access configuration, use the show telnet server command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays the status of the Telnet server.
switch# show telnet server
telnet service enabled
Cisco MDS 9000 Family Command Reference
22-368
show telnet server
Modification
This command was introduced.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x