Show Trunk Protocol - Cisco MDS 9124 - Fabric Switch Reference

show trunk protocol

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show trunk protocol
To display trunk protocol status, use the show trunk protocol command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
None.
Examples The following example displays trunk protocol status.
switch# show trunk protocol
Trunk protocol is enabled
Cisco MDS 9000 Family Command Reference
22-374
show trunk protocol
Modification
This command was introduced.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x