Cisco MDS 9124 - Fabric Switch Reference page 780

member (ivr zone configuration)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
member (ivr zone configuration)
To add a member name to an Inter-VSAN Routing (IVR) zone, use the member command in IVR zone
configuration submode. To remove a member name from an fcalias, use the no form of the command.
Syntax Description
device-alias aliasname
lun lun-id
vsan vsan-id
autonomous-fabric-id
afid
pwwn pwwn-id
Defaults None.
Command Modes IVR zone configuration submode.
Command History Release
1.3(1)
2.1(1a)
Usage Guidelines
You can configure an IVR zone member based on the specified pWWN and LUN value or, based on the
specified pWWN, LUN value, and AFID.
The CLI interprets the LUN identifier value as a hexadecimal value whether or not the 0x prefix is
Note
included.
Examples
The following example shows how to configures an IVR zone member based on the device alias VSAN,
and the AFID.
Cisco MDS 9000 Family Command Reference
15-8
member {device-alias aliasname {lun lun-id vsan vsan-id autonomous-fabric-id afid |
vsan vsan-id autonomous-fabric-id afid} |
pwwn pwwn-id {lun lun-id vsan vsan-id autonomous-fabric-id afid | vsan vsan-id
autonomous-fabric-id afid}}
no member {device-alias aliasname {lun lun-id vsan vsan-id autonomous-fabric-id afid |
vsan vsan-id autonomous-fabric-id afid} |
pwwn pwwn-id {lun lun-id vsan vsan-id autonomous-fabric-id afid | vsan vsan-id
autonomous-fabric-id afid}}
Specifies the member device alias. Maximum length is 64 characters.
Specifies the member LUN ID. The format is 0xhhhh[:hhhh[:hhhh[:hhhh]]],
where h is a hexadecimal digit.
Specifies the VSAN ID. The range is 1 to 4093.
Specifies the AFID to the local VSAN.
Specifies the member pWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh,
where h is a hexadecimal digit.
Modification
This command was introduced.
Added lun parameter.
Chapter 15 M Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x