Show Ip Access-List - Cisco MDS 9124 - Fabric Switch Reference

show ip access-list

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show ip access-list
To display the IP access control lists (IP-ACLs) currently active, use the show ip access-list command.
Syntax Description
ip access-list
list-number
usage
Defaults None.
Command Modes EXEC mode.
Command History Release
1.2(1)
Usage Guidelines None.
Examples The following example displays configured IP-ACLs.
switch# show ip access-list usage
Access List Name/Number
-------------------------------- ------- ---- --------- -------------
abc
x1
x3
The following example displays a summary of the specified IP-ACL
switch# show ip access-list abc
ip access-list abc permit tcp any any (0 matches)
ip access-list abc permit udp any any (0 matches)
ip access-list abc permit icmp any any (0 matches)
ip access-list abc permit ip 10.1.1.0 0.0.0.255 (2 matches)
ip access-list abc permit ip 10.3.70.0 0.0.0.255 (7 matches)
Cisco MDS 9000 Family Command Reference
22-154
show ip access-list [list-number | usage]
Modification
This command was introduced.
Displays the information for all IP-ACLs.
Specifies the IP-ACL. The range is 1 to 256.
Specifies the interface type.
Filters IF Status
3 7 active
3 1 active
0 1 not-ready Tue Jun 24 18:32:28 2003
Chapter 22 Show Commands
Creation Time
Tue Jun 24 17:51:40 2003
Tue Jun 24 18:32:25 2003
OL-16217-01, Cisco MDS SAN-OS Release 3.x