Use-Profile - Cisco MDS 9124 - Fabric Switch Reference

use-profile

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
use-profile
To bind a profile to the FCIP interface, use the use-profile option. To disable a configured profile, use
the no form of the option.
Syntax Description
use-profile profile-id
Defaults None.
Command Modes Interface configuration submode.
Command History Release
1.1(1)
Usage Guidelines Access this command from the
This command binds the profile with the FCIP interface.
Examples
switch# config terminal
switch(config)# interface fcip 50
switch(config-if)# use-profile 100
switch(config-if)# no use-profile 100
Related Commands Command
show interface fcip
show fcip
Cisco MDS 9000 Family Command Reference
24-4
use-profile profile-id
no use-profile profile-id
Specifies the profile ID to be used. The range is 1 to 255.
Modification
This command was introduced.
Description
Displays an interface configuration for a specified FCIP interface.
Displays information about the FCIP profile.
submode.
switch(config-if)#
Chapter 24 U Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x