System Health Cf-Crc-Check - Cisco MDS 9124 - Fabric Switch Reference

system health cf-crc-check

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
system health cf-crc-check
To run the CompactFlash CRC checksum test on demand, use the system health cf-crc-check command
in EXEC mode.
Syntax Description module slot
Defaults
Enabled to automatically run in the background every 7 days.
Command Modes
EXEC mode.
Command History Release
3.1(3)
Usage Guidelines
Run the CompactFlash CRC checksum test on demand to determine if the CompactFlash firmware is
corrupted and needs to be updated.
The CRC checksum test can be run on demand on the following modules:
•
•
•
•
•
•
Examples The following example shows how to run the CRC checksum test on demand.
switch# system health cf-crc-check module 4
Related Commands Command
show system health
show system health
statistics
Cisco MDS 9000 Family Command Reference
21-94
system health cf-crc-check module slot
Modification
This command was introduced.
DS-X9016
DS-X9032
DS-X9302-14K9
DS-X9308-SMIP
DS-X9304-SMIP
DS-X9530-SF1-K9
Description
Displays system health information.
Displays system health statistics.
Specifies the module slot number.
Chapter 21
OL-16217-01, Cisco MDS SAN-OS Release 3.x
S Commands