Show Boot - Cisco Catalyst 2950 Command Reference Manual

Chapter 2 Catalyst 2950 and 2955 Cisco IOS Commands

show boot

Use the show boot privileged EXEC command to display the settings of the boot environment variables.
Syntax Description
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.1(11)EA1
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Only the software can read and write a copy of the private configuration file. You cannot read, write,
Note
delete, or display a copy of this file.
Examples This is an example of output from the show boot command.
Switch# show boot
BOOT path-list:
Config file:
Private Config file: flash:private-config.text
Enable Break:
Manual Boot:
HELPER path-list:
NVRAM/Config file
buffer size:
0L-10102-01
show boot [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
flash:boot
flash:config.text
no
yes
32768
Table 2-8
Catalyst 2950 and Catalyst 2955 Switch Command Reference
show boot
describes each field in the output.
2-275