Show Ips Ip Route - Cisco MDS 9124 - Fabric Switch Reference

show ips ip route

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show ips ip route
To show the IP storage route table information, use the show ips ip route command.
Syntax Description
interface gigabitethernet slot/port
Defaults None.
Command Modes EXEC mode.
Command History Release
1.1(1)
Usage Guidelines None.
Examples The following example displays the IP route table information for a Gigabit Ethernet interface.
switch# show ips ip route interface gigabitethernet 8/1
Codes: C - connected, S - static
No default gateway
C 10.1.3.0/24 is directly connected, GigabitEthernet8/1
Cisco MDS 9000 Family Command Reference
22-162
show ips ip route interface gigabitethernet slot/port
Modification
This command was introduced.
Specifies a Gigabit Ethernet interface by the slot and port.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x