Cisco MDS 9124 - Fabric Switch Reference page 1015

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Usage Guidelines You can clear the error history for Fibre Channel interfaces, iSCSI interfaces, for an entire module, or
one particular test for an entire module. The battery-charger, the bootflash, the cache-disk, the eobc,
the inband, the loopback, and the mgmt test options can be individually specified for a given module.
The management port test cannot be run on a standby supervisor module.
Examples The following example clears the error history for the specified Fibre Channel interface.
switch# system health clear-errors interface fc 3/1
The following example clears the error history for the specified module.
switch# system health clear-errors interface module 3
The following example clears the management port test error history for the specified module.
switch# system health clear-errors module 2 mgmt
OL-16217-01, Cisco MDS SAN-OS Release 3.x
system health clear-errors
Cisco MDS 9000 Family Command Reference
21-97