Show Scheduler - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show scheduler

To display command scheduler information, use the show scheduler command.
Syntax Description
config
job
name jobname
logfile
schedule
name schedulename
Defaults
None.
Command Modes
EXEC mode.
Command History Release
2.0(x)
Usage Guidelines To use this command, the command scheduler must be enabled using the scheduler enable command.
Examples
The following example displays the command scheduler configuration information.
switch# show scheduler config
config terminal
scheduler enable
end
The following example displays the command scheduler schedule information.
switch# show scheduler schedule configureVsan99
Schedule Name : configureVsan99
------------------------------------
User Name : admin
Schedule Type : Run once on Tue Aug 10 09:48:00 2004
Last Execution Time: Tue Aug 10 09:48:00 2004
-----------------------------------------------
Job Name
-----------------------------------------------
addMemVsan99
The following example displays the command scheduler logfile information.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show scheduler {config | job [name jobname] | logfile | schedule [name schedulename]}
Displays command scheduler configuration information.
Displays job information.
Restricts the output to a specific job name. Maximum length is 31
characters.
Displays the log file.
Displays schedule information.
Restricts the output to a specific schedule name. Maximum length is 31
characters.
Modification
This command was introduced.
Status
Success (0)
Cisco MDS 9000 Family Command Reference
show scheduler
22-313