ssh
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
ssh
To initiate a Secure Shell (SSH) session, use the ssh command in EXEC mode.
Syntax Description
hostname
userid
Defaults
The default user name is admin.
Command Modes
EXEC mode.
Command History
Release
1.0(2)
Usage Guidelines
None.
Examples
The following example shows how to initiate an SSH session using a host name.
switch# ssh host1
admin@1host1's password:
The following example shows how to initiate an SSH session using a host IP address.
switch# ssh 10.2.2.2
admin@10.1.1.1's password:
The following example shows how to initiate an SSH session using a user name host name.
switch# ssh user1@host1
user1@1host1's password:
Related Commands
Command
show ssh key
ssh server enable
Cisco MDS 9000 Family Command Reference
21-54
ssh {hostname | userid@hostname}
Specifies the name or IP address of the host to access.
Specifies a user name on a host.
Modification
This command was introduced.
Description
Displays SSH key information.
Enables SSH server.
Chapter 21
OL-16217-01, Cisco MDS SAN-OS Release 3.x
S Commands