Span Max-Queued-Packets - Cisco MDS 9124 - Fabric Switch Reference

span max-queued-packets

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
span max-queued-packets
To configure the SPAN max-queued-packets, use the span max-queued-packets command in
configuration mode.To disable the SPAN drop-threshold, use the no form of the command.
Syntax Description id
Defaults 15.
Command Modes Configuration mode
Command History Release
3.3(1a)
Usage Guidelines
This command is supported only on a ISOLA platform.
Examples The following example shows how to configure the SPAN max-queued-packets.
switch#config
Enter configuration commands, one per line.
switch(config)# span max-queued-packets 1
Related Commands Command
show span
max-queued-packets
show span
drop-counters
Cisco MDS 9000 Family Command Reference
21-50
span max-queued-packets id
Specifies the SPAN max-queued-packets threshold ID. The range is 1 to
8191.
Modification
This command was introduced.
Description
Displays the SPAN max-queued-packets.
Displays the SPAN drop-counters.
End with CNTL/Z.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands