Show Aaa Authentication - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show aaa authentication

To display configured authentication information, use the show aaa authentication command.
Syntax Description
login error-enable
login mschap
Defaults None.
Command Modes EXEC mode.
Command History Release
1.3(1)
2.0(x)
3.0(1)
Usage Guidelines
None.
Examples The following example displays the configured authentication parameters.
switch# show aaa authentication
The following example displays the authentication login error message enable configuration.
switch# show aaa authentication login error-enable
disabled
The following example displays the authentication login MS-CHAP enable configuration.
switch# show aaa authentication login mschap
disabled
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show aaa authentication [login {error-enable | mschap}]
Displays the authentication login error message enable configuration.
Displays the authentication login MS-CHAP enable configuration.
Modification
This command was introduced.
Added the login error-enable option.
Added the login mschap option.
default: group TacServer local none
console: local
iscsi: local
dhchap: local
show aaa authentication
Cisco MDS 9000 Family Command Reference
22-3