Show Version - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show version

To display the version of system software that is currently running on the switch, use the show version
command.
Syntax Description
clock-module
epld
epld url
image
bootflash:
slot0:
volatile:
image-filename
module slot
Defaults
None.
Command Modes EXEC mode.
Command History Release
1.0(2)
1.0(3)
3.0(1)
Usage Guidelines Use the show version image command to verify the integrity of the image before loading the images.
This command can be used for both the system and kickstart images.
Use the show version command to verify the version on the active and standby supervisor modules
before and after an upgrade.
Examples The following examples display the versions of the system, kickstart, and failed images.
switch(boot)# show version image bootflash:system_image <------------
image name: m9500-sf1ek9-mz.1.0.3.bin
system:
compiled:
switch(boot)# show version image bootflash:kickstart_image <-------------
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show version [clock-module epld | epld url | image {bootflash: | slot0: | volatile:} image-filename
| module slot [epld]]
Displays all current EPLD versions on the clock module.
Displays all current versions of EPLDs on a specified module.
Displays all EPLD versions that are available at the specified URL
(bootflash:, ftp:, scp:, sftp:, slot0:, tftp:, or volatile:)
Displays the software version of a given image.
Specifies internal bootflash memory.
Specifies CompactFlash memory or PCMCIA card.
Specifies the volatile directory.
Specifies the name of the system or kickstart image.
Displays the software version of a module in the specified slot.
Modification
This command was introduced.
Command was modified.
Added the clock-module option.
version 1.0(3)
10/25/2010 12:00:00
system image
Cisco MDS 9000 Family Command Reference
show version
kickstart image
22-377