Show Iscsi Initiator - Cisco MDS 9124 - Fabric Switch Reference

show iscsi initiator

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show iscsi initiator
To display information about all the iSCSI nodes that are remote to the switch, use the show iscsi
initiator command.
Syntax Description
configured
initiator-name
detail
fcp-session
iscsi-session
summary
name
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.1(1)
Usage Guidelines If no parameter is provided the command lists all the active iSCSI initiators. If the iSCSI node name is
provided then the command lists the details of that iSCSI initiator.
Examples The following example displays all iSCSI initiators.
switch# show iscsi initiator
iSCSI Node name is iqn.1987-05.com.cisco.01.15cee6e7925087abc82ed96377653c8
iSCSI Node name is iqn.1987-05.com.cisco:02.91b0ee2e8aa1.iscsi16-w2k
Cisco MDS 9000 Family Command Reference
22-184
show iscsi initiator [configured [initiator-name] | detail | fcp-session [detail] | iscsi-session
[detail] | summary [name]]
Displays the configured information for the iSCSI initiator.
Specifies the name of an initiator.
Displays detailed iSCSI initiator information.
Displays the Fibre Channel session details.
Displays iSCSI session details.
Displays summary information.
Displays initiator name information.
Modification
This command was introduced.
iSCSI alias name: iscsi7-lnx
Node WWN is 23:10:00:05:30:00:7e:a0 (dynamic)
Member of vsans: 1
Number of Virtual n_ports: 1
Virtual Port WWN is 23:12:00:05:30:00:7e:a0 (dynamic)
Interface iSCSI 8/3, Portal group tag: 0x382
VSAN ID 1, FCID 0xdc0100
iSCSI alias name: ISCSI16-W2K
Node WWN is 23:1f:00:05:30:00:7e:a0 (dynamic)
Member of vsans: 1
Number of Virtual n_ports: 1
Virtual Port WWN is 23:28:00:05:30:00:7e:a0 (dynamic)
Interface iSCSI 8/3, Portal group tag: 0x382
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x