Show Ips Stats Netsim - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show ips stats netsim

To display IP Network Simulator interface statistics, use the show ips stats netsim command.
Syntax Description
ingress
gigabitethernet
slot/port
Defaults
None.
Command Modes
EXEC.
Command History Release
3.1(1)
Usage Guidelines The parameters displayed by default are delay, bandwidth, queue size, and queue delay. The
network statistics displayed are number of packets dropped, queue size, number of packets
reordered, and average speed.
Examples The following example shows the IP Network Simulator statistics for interface 2/3.
switch# show ips stats netsim ingress gigabitethernet 2/3
Network Simulator Configuration for Ingress on GigabitEthernet2/3
Delay : 50000 microseconds
Rate : 1000000 kbps
Max_q : 100000 bytes
Max_qdelay : 600000 clocks
Random Drop % : 1.00%
Network Simulator Statistics for Ingress on GigabitEthernet2/3
Dropped (tot) = 28
Dropped (netsim) = 14
Reordered (netsim) = 0
Max Qlen(pkt) = 7
Qlen (pkt) = 0
Max Qlen (byte) = 326
Qlen (byte) = 0
Mintxdel(poll) = 852
Mintxdel(ethtx) = 360
empty = 757
txdel = 8
late = 617
Average speed = 0 Kbps
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show ips stats netsim ingress gigabitethernet slot/port
Specifies the ingress direction.
Specifies the the slot and port number of the Gigabit Ethernet interface.
Modification
This command was introduced.
Cisco MDS 9000 Family Command Reference
show ips stats netsim
22-171