Show Logging - Cisco MDS 9124 - Fabric Switch Reference

show logging

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show logging
To display the current message logging configuration, use the show logging command.
Syntax Description console
info
last lines
level facility
logfile
module
monitor
nvram
onboard information
pending
pending-diff
server
status
Defaults None.
Command Modes EXEC mode.
Command History Release
1.3(1)
2.0(x)
3.0(1)
Cisco MDS 9000 Family Command Reference
22-230
show logging [console | info | last lines | level facility | logfile | module | monitor |
nvram [last lines] | onboard information | pending | pending-diff | server | status]
Displays console logging configuration.
Displays logging configuration.
Displays last few lines of the log file. The range is 1 to 9999.
Displays facility logging configuration. Facility values include aaa, acl,
auth, authpriv, bootvar, callhome, cdp, cfs, cimserver, cron, daemon,
device-alias, dstats, ethport, fc2d, fcc, fcd, fcdomain, fcns, fcsp-mgr,
fdmi, ficon, flogi, fspf, ftp, ike, ipacl, ipconf, ipfc, ips, ipsec, isns, kernel,
license, localn, lpr, mail, mcast, module, news, platform, port,
port-security, qos, radius, rdl, rib, rlir, rscn, scsi-target, security,
syslog, sysmgr, systemhealth, tacacs, tlport, user, uucp, vni, vrrp-cfg,
vsan, vshd, wwm, xbar, zone.
Displays contents of the log file.
Displays module logging configuration.
Displays monitor logging configuration.
Displays NVRAM log.
Displays onboard failure logging (OBFL) information. The types of
information include boot-uptime, cpu-hog, device-version, endtime,
environmental-history, error-stats, exception-log, interrupt-stats,
mem-leak, miscellaneous-error, module, obfl-history, obfl-logs,
register-log, stack-trace, starttime, status, system-health.
Displays the server address pending configuration.
Displays the server address pending configuration differences with the
active configuration.
Displays server logging configuration.
Displays the status of the last operation.
Modification
This command was introduced.
Added the pending, pending-diff, and status keywords.
Added the onboard keyword.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x