Show Crypto Global Domain Ipsec - Cisco MDS 9124 - Fabric Switch Reference

show crypto global domain ipsec

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show crypto global domain ipsec
To display global IPsec crypto map set information, use the show crypto global domain ipsec
command.
Syntax Description
interface gigabitethernet
slot/port
security-association lifetime
Defaults
None.
Command Modes EXEC mode.
Command History Release
2.0(x)
Usage Guidelines
To use this command, IPsec must be enabled using the crypto ipsec enable command.
Examples
The following example shows how to display crypto global domain IPsec statistics.
switch# show crypto global domain ipsec
IPSec global statistics:
The following example shows how to display crypto global domain IPsec statistics for an interface.
switch# show crypto global domain ipsec interface gigabitethernet 1/2
IPSec interface statistics:
The following example shows how to display crypto global domain IPsec security association lifetime
parameters.
switch# show crypto global domain ipsec security-association lifetime
Security Association Lifetime: 4500 megabytes/3600 seconds
Cisco MDS 9000 Family Command Reference
22-44
show crypto global domain ipsec [interface gigabitethernet slot/port | security-association
lifetime]
Modification
This command was introduced.
Number of crypto map sets: 2
IKE transaction stats: 0 num
Inbound SA stats: 0 num, 512 max
Outbound SA stats: 0 num, 512 max
Displays crypto IPsec domain information for the specified Gigabit
Ethernet interface slot and port.
Displays crypto IPsec domain security association lifetime
parameters.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x