Show Sdv - Cisco MDS 9124 - Fabric Switch Reference

show sdv

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show sdv
To display information about SAN device virtualization, use the show sdv command in EXEC mode.
Syntax Description
database
pending
vsan vsan-id
merge status
pending-diff
session
statistics
virtual-device
name device-name
zone
active
Defaults None.
Command Modes EXEC mode.
Command History Release
3.1(2)
Usage Guidelines None.
Examples The following example displays SDV database information.
switch# show sdv database vsan 2
virtual-device name vdev1 vsan 2
[ WWN:50:00:53:00:00:d2:e0:01 FCID:0x960001 Real-FCID:0x9f0201 ]
virtual-fcid 0x960001
pwwn 21:00:00:04:cf:cf:45:40 primary
pwwn 21:00:00:04:cf:cf:38:d6
The following example displays merge status.
switch# show sdv merge status vsan 1
Merge Status for VSAN
-----------------------------
Last Merge Time Stamp
Cisco MDS 9000 Family Command Reference
22-322
show sdv {database [pending vsan vsan-id | vsan vsan-id] | merge status vsan vsan-id |
pending-diff vsan vsan-id | session status vsan vsan-id | statistics vsan vsan-id |
virtual-device name device-name vsan vsan-id | zone [active vsan vsan-id | vsan vsan-id]}
Displays the SDV database.
Displays the pending SDV database.
Specifies the number of the VSAN. The range is 1 to 4093.
Displays SDV merge status.
Displays SDV pending differences.
Displays SDV session status.
Displays SDV statistics.
Displays SDV virtual devices.
Specifies the name of the virtual target. The maximum size is 32.
Specifies the zone.
Specifies the active VSAN.
Modification
This command was introduced.
: 1
: None
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x