Show Ip Route - Cisco MDS 9124 - Fabric Switch Reference

show ip route

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show ip route
To display the ip routes currently active, use the show ip route command.
Syntax Description
configured
Defaults None.
Command Modes EXEC mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example displays active IP routes.
switch# show ip route
Codes: C - connected, S - static
Default gateway is 172.22.95.1
C 10.0.0.0/24 is directly connected, vsan1
C 172.22.95.0/24 is directly connected, mgmt0
The following example displays configured IP routes.
switch# show ip route configured
Cisco MDS 9000 Family Command Reference
22-158
show ip route [configured]
Modification
This command was introduced.
default 172.22.31.1
10.10.11.0 10.10.11.1
10.10.50.0 10.10.50.1
10.10.51.0 10.10.51.1
10.10.60.0 10.10.60.1
172.22.31.0 172.22.31.110
Displays configured IP routes.
0.0.0.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
Chapter 22 Show Commands
0 mgmt0
0 GigabitEthernet1/1
0 GigabitEthernet1/2.1
0 GigabitEthernet1/2.2
0 GigabitEthernet1/2
0 mgmt0
OL-16217-01, Cisco MDS SAN-OS Release 3.x