Send - Cisco MDS 9124 - Fabric Switch Reference

Chapter 21 S Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

send

To send a message to all active CLI users currently using the switch, use the send command in EXEC
mode.
Syntax Description message-text
Defaults
None.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines
This message is restricted to 80 alphanumeric characters with spaces.
Examples
The following example sends a warning message to all active users about the switch being shut down.
switch# send Shutting down the system in 2 minutes. Please log off.
Broadcast Message from admin@excal-112
Shutting down the system in 2 minutes. Please log off.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
send message-text
Specifies the text of your message.
Modification
This command was introduced.
(/dev/pts/3) at 16:50 ...
Cisco MDS 9000 Family Command Reference
send
21-19