Show Ivr Service-Group - Cisco MDS 9124 - Fabric Switch Reference

show ivr service-group

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show ivr service-group
To display an inter-VSAN routing (IVR) service groups, use the show ivr service-group command.
Syntax Description
active
configured
Defaults None.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines You can configure a maximum of 16 IVR service groups.
Examples The following example displays IIVR service groups.
switch# show ivr service-group
IVR CONFIGURED Service Group
====================================
SG-ID SG-NAME AFID VSANS
------------------------------------------------------------------------------
1 sg-100 1 200-201,250,270
2 sg-200 1 100-101,150,170
Total: 2 entries in configured service group table
IVR ACTIVE Service Group
====================================
SG-ID SG-NAME AFID VSANS
------------------------------------------------------------------------------
1 sg-100 1 200-201,250,270
2 sg-200 1 100-101,150,170
Total: 2 entries in active service group table
Related Commands Command
clear ivr service-group
database
ivr service-group
name
Cisco MDS 9000 Family Command Reference
22-222
show ivr service-group [active | configured]
Displays active IVR service groups.
Displays configured IVR service groups.
Modification
This command was introduced.
Description
Clears an IVR service group database.
Configures an IVR service group.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x