Security-Mode - Cisco MDS 9124 - Fabric Switch Reference

security-mode

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
security-mode
To configure the Cisco SME security settings, use the security-mode command. To delete the security
settings, use the no form of the command.
Syntax Description
basic
standard
advanced
schema
threshold threshold
total total
Defaults
None.
Command Modes
Cisco SME cluster configuration submode.
Command History Release
3.2(2)
Usage Guidelines None.
Examples
The following example sets the security mode to basic:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# security-mode basic
The following example sets the security mode to advanced:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# security-mode advanced schema threshold 3 total 5
Related Commands Command
show sme cluster
Cisco MDS 9000 Family Command Reference
21-18
security-mode {basic | standard | advanced {schema threshold threshold total total }}
no security-mode {basic | standard | advanced {schema threshold threshold total total }
Sets the Cisco SME security level to basic.
Sets the Cisco SME security level to standard.
Sets the Cisco SME security level to advanced.
Configures the recovery schema.
Configures the recovery schema threshold. The limit is 2-3.
Configures the recovery schema total.The limit is 5-5.
Modification
This command was introduced.
Description
Displays information about the security settings.
Chapter 21
OL-16217-01, Cisco MDS SAN-OS Release 3.x
S Commands