Logging Server - Cisco MDS 9124 - Fabric Switch Reference

logging server

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
logging server
To set message logging for the remote server, use the logging server command.
Syntax Description
logging server
hostname
ip address
severity_level
facility
auth
authpriv
cron
daemon
ftp
kernel
local0
local1
local2
local3
local4
local5
local6
local7
lpr
mail
news
syslog
user
uucp
Defaults None.
Command Modes Configuration mode.
Cisco MDS 9000 Family Command Reference
14-22
logging server [hostname | ip address severity_level | facility auth | authpriv | cron | daemon | ftp
| kernel | local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7 | lpr | mail | news |
syslog | user | uucp]
Sets message logging for remote server.
Enters host name for remote server.
Enters the IP address for the remote server.
Enter severity level of message.
0-emerg;1-alert;2-crit;3-err;4-warn;5-notif;6-inform;7-debug
Facility to use when forwarding to server
Use auth facility
Use authpriv facility
Use Cron/at facility
Use daemon facility
Use file transfer system facility
Use kernel facility
Use local0 facility
Use local1 facility
Use local2 facility
Use local3 facility
Use local4 facility
Use local5 facility
Use local6 facility
Use local7 facility
Use lpr facility
Use mail facility
Use USENET news facility
Use syslog facility
Use user facility
Use Unix-to-Unix copy system facility
Chapter 14
OL-16217-01, Cisco MDS SAN-OS Release 3.x
L Commands