Server - Cisco MDS 9124 - Fabric Switch Reference

server

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
server
To add a server in an Internet Storage Name Service (iSNS) profile, use the server command in iSNS
profile configuration submode. To delete a server from an iSNS profile, use the no form of the
command.
Syntax Description server-id
Defaults None.
Command Modes
iSNS profile configuration submode.
Command History Release
1.3(1)
Usage Guidelines An iSNS profile can have only one server address. To change the server address, you must delete the
current server and add the new one.
Examples The following example shows how to add a server address to an iSNS profile.
switch# config terminal
switch(config)# isns profile name UserProfile
switch(config-isns-profile)# server 10.1.1.1
The following example shows how to delete a server address from an iSNS profile.
switch# config terminal
switch(config)# isns profile name AdminProfile
switch(config-isns-profile)# no server 10.2.2.2
Related Commands Command
isns-server enable
isns profile name
show isns
Cisco MDS 9000 Family Command Reference
21-20
server server-id
no server server-id
Specifies the server address. The format is A.B.C.D.
Modification
This command was introduced.
Description
Enables the iSNS server.
Creates iSNS profiles.
Displays iSNS information.
Chapter 21
OL-16217-01, Cisco MDS SAN-OS Release 3.x
S Commands