Show System Default Zone - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show system default zone

To verify the configured default zone values, use the show system default zone command.
Syntax Description
This command has no other arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
3.0(1)
3.2(1)
Usage Guidelines None.
Examples The following example shows the default values for default-zone as deny, distribute as active only, and
zone mode as basic.
switch# show system default zone
system default zone default-zone deny
system default zone distribute active only
system default zone mode basic
The following example shows the default values for default-zone as permit, distribute as full, and zone
mode as enhanced.
switch# show system default zone
system default zone default-zone permit
system default zone distribute active full
system default zone mode enhanced
Related Commands Command
system default zone
mode enhanced
no system default zone
mode enhanced
system default zone
distribute full
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show system default zone
Modification
This command was introduced.
Added the basic default zoning mode option.
Description
Configures the default value of zone mode as enhanced.
Configures the default value of zone mode as basic.
Configures the default value of distribute as full.
show system default zone
Cisco MDS 9000 Family Command Reference
22-349