Switch-Priority - Cisco MDS 9124 - Fabric Switch Reference

switch-priority

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
switch-priority
To configure the switch priority with the Call Home function, use the switch-priority command in Call
Home configuration submode. To disable this feature, use the no form of the command.
Syntax Description
priority-value
Defaults None.
Command Modes Call Home configuration submode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following example shows how to configure the switch priority in the Call Home configuration.
switch# config terminal
Enter configuration commands, one per line.
switch(config)# callhome
switch(config-callhome)# switch-priority 0
Related Commands Command
callhome
callhome test
show callhome
Cisco MDS 9000 Family Command Reference
21-68
switch-priority {priority-value}
no switch-priority {priority-value}
Specifies the priority level. 0 is the highest priority and 7 the lowest.
Modification
This command was introduced.
Description
Configures the Call Home function.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
End with CNTL/Z.
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands