Tcp Send-Buffer-Size - Cisco MDS 9124 - Fabric Switch Reference

Chapter 23 T Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

tcp send-buffer-size

To define the required additional buffering—beyond the normal send window size —that TCP allows
before flow controlling the switch's egress path for the FCIP interface, use the tcp send-buffer-size
command. Use the no form of this command to disable this feature or revert to its factory defaults.
Syntax Description size
Defaults Enabled.
The default FCIP buffer size is 0 KB.
The default iSCSI buffer size is 4096 KB
Command Modes FCIP profile configuration submode.
Command History Release
1.3(4)
Usage Guidelines None.
Examples The following example configures a FCIP profile:
switch# config terminal
switch(config)# fcip profile 5
switch(config-profile)#
The following example configure the advertised buffer size to 5000 KB :
switch(config-profile)# tcp send-buffer-size 5000
Related Commands Command
fcip profile
show fcip profile
OL-16217-01, Cisco MDS SAN-OS Release 3.x
tcp send-buffer-size size
no tcp send-buffer-size size
Modification
This command was introduced.
Description
Configures FCIP profile parameters.
Displays FCIP profile information.
Specifies the buffer size in KB. The range is 0 to 8192.
Cisco MDS 9000 Family Command Reference
tcp send-buffer-size
23-41