Show Ntp - Cisco MDS 9124 - Fabric Switch Reference

show ntp

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show ntp
To display the configured Network Time Protocol (NTP) server and peer associations, use the show ntp
command.
Syntax Description
peers
pending peers
pending-diff
session-status
statistics
io
local
memory
peer
ipaddr ip-address
name peer-name
timestamp-status
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.0(2)
2.0(x)
Usage Guidelines None.
Examples The following example displays the NTP peer information.
switch# show ntp peers
--------------------------------------------
Peer IP Address
--------------------------------------------
10.20.10.2
10.20.10.0
Cisco MDS 9000 Family Command Reference
22-264
show ntp {peers | pending peers | pending-diff | session-status | statistics [io | local | memory |
peer {ipaddr ip-address | name peer-name}] | timestamp-status}
Displays all the peers.
Displays pending NTP configuration changes on all peers.
Displays the differences between the pending NTP configuration changes
and the active NTP configuration.
Displays the Cisco Fabric Services (CFS) session status.
Displays the NTP statistics
Displays the input/output statistics.
Displays the counters maintained by the local NTP.
Displays the statistics counters related to memory code.
Displays the per-peer statistics counter of a peer.
Displays the peer statistics for the specified IP address.
Displays the peer statistics for the specified peer name.
Displays if the timestamp check is enabled.
Modification
This command was introduced.
Added the pending, pending-diff, and session-status keywords.
Serv/Peer
Server
Peer
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x