Show Crypto Transform-Set Domain Ipsec - Cisco MDS 9124 - Fabric Switch Reference

Chapter 22 Show Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

show crypto transform-set domain ipsec

To display transform set information for IPsec, use the show crypto transform-set domain ipsec
command.
Syntax Description set-name
Defaults
Displays information for all transform sets.
Command Modes
EXEC mode.
Command History Release
2.0(x)
Usage Guidelines
To use this command, IPsec must be enabled using the crypto ipsec enable command.
Examples
The following example shows how to display information for all IPsec transform sets.
switch# show crypto transform-set domain ipsec
Transform set: ipsec_default_transform_set {esp-aes-256-ctr esp-aes-xcbc-mac}
Related Commands Command
crypto ipsec enable
crypto transform-set
domain ipsec
OL-16217-01, Cisco MDS SAN-OS Release 3.x
show crypto transform-set domain ipsec [set-name]
Specifies the transform set name. Maximum length is 63 characters.
Modification
This command was introduced.
will negotiate {tunnel}
Description
Enables IPsec.
Configures IPsec transform set information.
show crypto transform-set domain ipsec
Cisco MDS 9000 Family Command Reference
22-53