Port-Security Abort - Cisco MDS 9124 - Fabric Switch Reference

Chapter 18 P Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

port-security abort

To discard the port security Cisco Fabric Services (CFS) distribution session in progress, use the
port-security abort command in configuration mode.
Syntax Description vsan vsan-id
Defaults
None.
Command Modes
Configuration mode.
Command History Release
2.0(x)
Usage Guidelines
None.
Examples
The following example shows how to discard a port security CFS distribution session in progress.
switch# config terminal
switch(config)# port-security abort vsan 33
Related Commands Command
port-security distribute
show port-security
OL-16217-01, Cisco MDS SAN-OS Release 3.x
port-security abort vsan vsan-id
Specifies the VSAN ID. The range is 1 to 4093.
Modification
This command was introduced.
Description
Enables CFS distribution for port security.
Displays port security information.
Cisco MDS 9000 Family Command Reference
port-security abort
18-19