Show Install All Impact - Cisco MDS 9124 - Fabric Switch Reference

show install all impact

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show install all impact
To display the software compatibility matrix of a specific image, use the show install all impact
command.
Syntax Description
asm-sfn
image-filename
kickstart
ssi
system
Defaults
None.
Command Modes EXEC mode.
Command History Release
1.2(1)
Usage Guidelines
None.
Examples
Use the show install all impact command to view the effect of updating the system from the running
image to another specified image.
switch# show install all impact
Verifying image bootflash:/ilc1.bin
[####################] 100% -- SUCCESS
Verifying image bootflash:/vk73a
[####################] 100% -- SUCCESS
Verifying image bootflash:/vs73a
[####################] 100% -- SUCCESS
Extracting "slc" version from image bootflash:/vs73a.
[####################] 100% -- SUCCESS
Extracting "slc" version from image bootflash:/vs73a.
[####################] 100% -- SUCCESS
Extracting "system" version from image bootflash:/vs73a.
[####################] 100% -- SUCCESS
Cisco MDS 9000 Family Command Reference
22-136
show install all impact [asm-sfn image-filename] [kickstart image-filename] [ssi image-filename]
[system image-filename]
Specifies the ASM SFN boot variable.
Specifies the name of an image.
Specifies the kickstart boot variable.
Specifies the SSI boot variable.
Specifies the system boot variable.
Modification
This command was introduced.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x