Show Iscsi Session - Cisco MDS 9124 - Fabric Switch Reference

show iscsi session

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show iscsi session
To display iSCSI session information, use the show iscsi session command.
Syntax Description
detail
incoming
initiator name
outgoing
target name
Defaults
None.
Command Modes EXEC mode.
Command History Release
1.1(1)
Usage Guidelines
All the parameters are optional in the show iscsi session commands. If no parameter is provided the
command lists all the active iSCSI initiator or target sessions. If the IP address or iSCSI node name is
provided, then the command lists details of all sessions from that initiator or to that target.
Examples
The following command displays the iSCSI session information.
switch# show iscsi session
Initiator iqn.1987-05.com.cisco.01.15cee6e7925087abc82ed96377653c8
Session #1
Session #2
Initiator iqn.1987-05.com.cisco:02.91b0ee2e8aa1.iscsi16-w2k
Session #1
Session #2
...
Cisco MDS 9000 Family Command Reference
22-186
show iscsi session [incoming] [initiator name] [outgoing] [target name] [detail]
Displays detailed iSCSI session information.
Displays incoming iSCSI sessions.
Displays specific iSCSI initiator session information. Maximum length is
80 characters.
Displays outgoing iSCSI sessions
Displays specific iSCSI target session information. Maximum length is 80
characters.
Modification
This command was introduced.
Target iqn.com.domainname.172.22.93.143.08-03.gw.22000020374b5247
VSAN 1, ISID 000000000000, Status active, no reservation
Target iqn.com.domainname.172.22.93.143.08-03.gw.220000203738e77d
VSAN 1, ISID 000000000000, Status active, no reservation
Discovery session, ISID 00023d00022f, Status active
Target iqn.com.domainname.172.22.93.143.08-03.gw.2200002037388bc2
VSAN 1, ISID 00023d000230, Status active, no reservation
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x