Show Tlport - Cisco MDS 9124 - Fabric Switch Reference

show tlport

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show tlport
To display configured TL port information, use the show tlport command
Syntax Description alpa-cache
discapp
fcid fcid-id
verbose
vsan vsan-id
interface
fc slot/port
all
private
proxied
topology
unsupported
list
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.0(2)
Usage Guidelines The show tlport command displays the TL port interface configurations. This command provides a list
of all TL ports configured on a box and displays the associated VSAN, the FCID for the port (only
domain and area are valid), and the current operational state of the TL port (up or initializing).
Examples The following example displays the TL ports in all VSANs.
switch# show tlport list
-------------------------------
Interface Vsan FC-ID
------------------------- ------
fc1/16
fc2/26
Cisco MDS 9000 Family Command Reference
22-370
show tlport {alpa-cache | discapp fcid fcid-id [vsan vsan-id] [verbose] | interface fc slot/port {all
| private | proxied | topology | unsupported} | list [vsan vsan-id]}
Displays the contents of the ALPA cache.
Displays private N port parameters.
Specifies the FCID of the N port.
Specifies the verbose mode.
Specifies the N port VSAN ID. The range is 1 to 4093.
Displays TL ports in the selected interface.
Specifies the Fiber Channel interface at the specified slot and port.
Displays all proxied & private devices on this TL Port.
Displays all private devices on this TL Port.
Displays all proxied devices on this TL Port.
Displays loop topology for this TL Port.
Displays all unsupported devices on this TL Port.
Displays TL ports in all VSANs.
Modification
This command was introduced.
State
1 0x420000 Init
1 0x150000 Up
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x