Show Flex-Attach Merge Status - Cisco MDS 9124 - Fabric Switch Reference

show flex-attach merge status

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show flex-attach merge status
To display the FlexAttach merger status, use the show flex-attach merge status command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes Exec mode
Command History Release
3.3(1a)
Usage Guidelines
None.
Examples The following example displays the FlexAttach merge status.
switch# show flex-attach merge status
Flex-Attach merge status
----------------
Status
Failure reason :
Related Commands Command
show flex-attach
show flex-attach
virtual-pwwn
Cisco MDS 9000 Family Command Reference
22-120
show flex-attach merger status
Modification
This command was introduced.
: Success
Description
Displays the FlexAttach distribution status.
Displays the current list of virtual pWWN on a specified interface.
Chapter 22 Show Commands
OL-16217-01, Cisco MDS SAN-OS Release 3.x