Ip Default-Network - Cisco MDS 9124 - Fabric Switch Reference

Chapter 11 I Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

ip default-network

To configure the IP address of the default network, use the ip default-network command in
configuration mode. To disable the IP address of the default network, use the no form of the command.
Syntax Description
ip-address
Defaults None.
Command Modes Configuration mode.
Command History Release
1.0(2)
Usage Guidelines None.
Examples The following examples configures the IP address of the default network to 1.1.1.4.
switch# config terminal
switch(config)# ip default-network 1.1.1.4
switch(config)# ip default-gateway 1.1.1.4
Related Commands Command
show ip route
OL-16217-01, Cisco MDS SAN-OS Release 3.x
ip default-network ip-address
no ip default-network ip-address
Specifies the IP address of the default network.
Modification
This command was introduced.
Description
Displays the IP address of the default gateway.
Cisco MDS 9000 Family Command Reference
ip default-network
11-51